So much of what I will write on this blog will assume a knowledge of crypto. I thought I’d create a post I could reference back to for many future posts to keep things simple and easy to understand.

Also, there is a video

which is a direct relay of this post. Maybe a good approach would be to watch the video first, then come back and examine particular areas in more detail slowly by reading this post.

### Algorithms and keys

We all know what an algorithm is. In cryptography it’s not the algorithm you keep secret. The algorithm should be designed in such a way that if it is discovered, unless the snooper has the key, it is useless to him/her. Many algorithms are publicly published. Key secrecy is what’s important. It even goes as far as to say that if you know the algorithm, in other words, you know what mathematics was used *and you also know* the ciphertext itself, a good encryption algorithm will still keep the plaintext data secret! It sounds impossible because if somebody told me “the answer is 27 and I know to get that number the algorithm divided by 10, added 4 then multiplied by 3”, I’d be able to pretty quickly calculate the input was 50. But these algorithms use special one-way functions (which we’ll look at in a moment) which make that impossible (or at least so difficult you’d never bother to attempt it) to do.

There are 2 broad classes of algorithm – symmetric and asymmetric. Symmetric algorithms use the same key for both encryption and decryption. Asymmetric algorithms, such as public/private key cryptography use one key for encryption and a different, though mathematically related key for decryption. That last sentence sounds counter-intuitive. As does the idea that publishing your algorithm still maintains secrecy. But that’s the truth. Of course an algorithm is only secure until/if somebody finds a weakness.

There is a scenario known as the doomsday scenario. This is the day somebody publishes an algorithm for predicting prime numbers. Almost the entirety of public/private key cryptography (used by protocols such as SSL/TLS) is based on the notion that there is no pattern to a series of prime numbers, other than that they are prime.

There is a possibility that somebody has already come up with a prime-prediction algorithm. It would certainly be in their interest to keep it secret!

The encryption algorithm has 2 inputs – plaintext and the key. It has one output, ciphertext.

If decrypting data, 2 inputs: ciphertext and the key. It has one output, plaintext.

### One Way Functions

Mathematical functions where it is difficult (or impossible) to get back to the source values, knowing only the output values, are known as one-way functions. There are many, but modular arithmetic gives us a method that is used extensively in cryptography.

A simple example is where, on a 12 hour clock face, you add 5 hours to 9am. The answer is 2 pm. Or written down we could say:

9+5=2

Because this is an example of modular arithmetic where the modulus is 12, we’d actually write:

9+5=2(mod12)

Let’s take a simple function:

3^{x }where x=2

This is a function for turning 2 in to 9, because it’s the same as 3 * 3, which equals 9. There is a direct relationship between the magnitude of x and the magnitude of the function result. Using modular arithmetic can give the function a great property – unpredictability.

x | 1 | 2 | 3 | 4 | 5 | 6 |

3^{x } |
3 | 9 | 27 | 81 | 243 | 729 |

3^{x}(mod7) |
3 | 2 | 6 | 4 | 5 | 1 |

Your password in Windows is stored as a one way function – albeit one that is considerably more complex than what you’ve just seen.

### Hashes

There are some very useful algorithms that produce fixed length strings. For example it doesn’t matter how much data you feed in to an MD4 hashing algorithm, you’ll always get a 128 bit string out of it. That means there must be rather a lot of input strings that will produce exactly the same output strings – and indeed there are; they’re called *collisions;* they are so rare, you might as well consider them to never happen, in just the same way you are very unlikely to ever have 2 GUIDs of the same value if the programming framework you use has true randomness and a uses big enough numbers for GUIDs. MD4 is a complicated one-way function, so predicting collisions is, to all intents and purposes, impossible. Unless you keep trying and comparing the output strings. This is, in theory the only way to find out. It’s called a *brute force attack*. You just use computing power to very quickly run through all possible combinations. This could take a long time. A very long time. Hashes are very useful because they allow you to perform comparisons very quickly. If you have a large message, you can create an MD4 hash of the message and send the hash to somebody over a slow network. They can then run a hash on data they hold, which they believe to be identical and compare the hash you sent them, with the one they just generated. If they are the same, it means the 2 datasets are the same.

So say if I take the string “1” and put it through hashing functions – I’ll end up with:

MD4: 8BE1EC697B14AD3A53B371436120641D

MD5: C4CA4238A0B923820DCC509A6F75849B

However, if I take the string “2”, which is numerically almost identical to the first string – I’ll get massively different results.

MD4: 2687049D90DA05D5C9D9AEBED9CDE2A8

MD5: C81E728D9D4C2F636F067F89CC14862C

All this stuff comes in very useful with digital signatures which I’ll describe a little later.

### Key Distribution

The problem with encrypting/decrypting data in the way I’ve told you so far, is that you have to somehow get the decryption key safely to your partner. It could easily be intercepted in this day of us all being permanently online. It’s the age-old problem that generals have had of communicating with their officers in the field for centuries. If the messenger who has the key is captured, all your communication can be decrypted, whether or not subsequent messengers know the key. This is called the *key distribution problem.*

3 mathematicians came up with an answer to this problem: Diffie, Hellman and Merkle. They do an exchange of data which can be intercepted by anybody but which allows both sender and receiver to generate the same key but doesn’t allow the interceptor to generate the key. Sounds incredible? It’s very simple to explain, now that you understand modular arithmetic.

Follow the steps 1 through 4. In the last step both Alice and Bob have the same key: 9. From this point on they can use 9 as their encryption and decryption key. All I can tell you is that it works. Why it works I have no idea – I am very poorly educated! However, I’m happy to live with the fact that it just works. If it’s beyond you, you’re not alone. Maybe you are also poorly educated! I do think it’s really clever, neat and cool though.

### Asymmetric Key Encryption

We use one key to encrypt, and a related key to decrypt data. You can actually swop the keys round. But the point is you don’t have one key. This gets round the key distribution problem. There’s a great way of describing the difference between symmetric and asymmetric key encryption. It involves the use of a box to put messages in and we have to assume the box, its clasps and the padlock used to lock it are impossible to penetrate.

Symmetric Key: You send a messenger out with a copy of the key. He gets it to your recipient who lives 10 miles away. On the way he stops at a pub and has his pocket picked. The key is whisked off to a locksmith who copies it and it is then secreted back in to the messenger’s pocket.

Some time later you send a messenger with the box containing your message. You are confident that your recipient is the only one who can read the message because the original messenger returned and reported nothing unusual about the key. The second messenger stops at the same pub. He is pick-pocketed. The copy key is used to unlock the box and read the message. The box with its message intact is secreted back in to the messenger’s pocket. You and your recipient have no idea that your communication has been compromised. There is no secrecy…

Asymmetric Key: Your recipient has a padlock and key. He keeps the key in a private place about his person. Let’s therefore call it a private key. He puts the padlock in to the box, but leaves it unlocked. He doesn’t mind if anybody sees the padlock. It’s publicly viewable. Even though it’s not *really* a key, let’s call it a public key. He sends a messenger to you with the box. The messenger stops at the pub and is pick pocketed. All the snoopers see is an open padlock. They secretly return the box. The messenger arrives at your door. You take the padlock out of the box and put your message in to it. You use the open padlock to lock the box, snapping it shut and you send the messenger on his way. He again stops at the pub and is pick-pocketed. They find only a padlocked box. No key. They have no way of getting in to the box. They secretly return the box to the messenger’s pocket. The messenger gets to your recipient, who use the key he secreted in a private place about his person (the private key) and uses it to unlock the padlock and read the message. Secrecy is maintained.

You can see the process is a bit more complicated for asymmetric key than for symmetric key, so it’s not something you’d want to do often. So what is often done is that instead of putting a message in the box and padlocking it, a symmetric key is put in the box and padlocked. That way, you solve the key distribution problem. That’s what happens with computer cryptography mostly. Public/private key cryptography is used to transport a symmetric key that is used for message exchanges. One reason for doing this is that asymmetric key crypto, or public/private key crypto, as it is known, is expensive, in terms of computing power, whereas symmetric key crypto is much more lightweight. When you see that a web site uses 256 bit encryption, they are talking about the symmetric key that is used* after* the public/private key crypto was used to transport the symmetric key from sender to receiver. Often the key lengths for public/private key cryptography is 2048 bits. You may have found yourself confused when setting up IIS with 256 bit SSL encryption and seeing keys of 1024 or 2048 bits. This is why – it’s the difference between what’s called the *session key* and the public/private keys.

Although the diagram above explains how 2 keys are used, where does all this public and private key malarkey come in to play?

Let’s take the example of an ecommerce web server that wants to provide SSL support so you can send your credit card details securely over the Internet. Look at the public and private keys in the following diagram.

The public and private keys are held on the ecommerce web server. The private key is heavily protected in the keystore. Many organisations will go as far as to have a special tamper-proof hardware device to protect their private keys. The public key doesn’t need to be protected because it’s, well, public. You could have daily printouts of it in the newspapers and have it broadcast every hour, on the hour, on the radio. The idea is that it doesn’t matter who sees it.

The website generates the public and private keys. They have to be generated as a *key-pair* because they are mathematically related to each other. You retrieve the public key from the website and use it as your encryption key. You’re not just going to send your credit card information across the Internet yet. You’re actually going to generate a symmetric key and that is going to become the plain-text input data to the asymmetric encryption algorithm. The cipher-text will traverse the Internet and the ecommerce site will now use its private key to decrypt the data. The resulting output plain-text will be the symmetric key you sent. Now that both you and the ecommerce site have a symmetric key that was transported secretly, you can encrypt all the data you exchange. This is what happens with a URL that starts *https://*.

There are still a couple of problems to solve here, but let’s put them on to the back-burner for a little while. We need to understand digital signatures and certificates for those problems. In the meantime let’s have a peek at the mathematics inside the public/private key algorithm. There is an interesting little story-ette around this algorithm. A researcher at the UK’s GCHQ called Clifford Cocks invented the algorithm in 1973. However, working for GCHQ, his work was secret, so he couldn’t tell anybody. About 3 years later, 3 mathematicians, Ron Rivest, Adi Shamir and Leonard Adelman also invented it. They went on to create the security company RSA (which stands for Rivest, Shamir and Adelman). It is said the RSA algorithm is the most widely used piece of software in the world.

First, we’ll generate the public key. We pick 2 random giant prime numbers. In this case, I’ll pick 2 small primes to keep it simple; 17 and 11. We multiply them to get 187. We then pick another prime; 7. That’s our public key – 2 numbers. Pretty simple.

Now we use the public key to generate the private key. We run it through the algorithm in the diagram above. You can see we use modular arithmetic. Obviously the numbers would be massive in real life. But here, we end up with a private key of 23. The function, 7 * d = 1(mod 160) has that look of simplicity, but it’s not like that at all. With large numbers we’d need to use the Extended Euclidean Algorithm. I have to say, my eyes glazed over and I was found staring in to the distance when I read this about it:

*The extended Euclidean algorithm is particularly useful when a and b are **coprime**, since x is the **modular multiplicative inverse** of a **modulo** b.*

Now we want to use that to encrypt a message.

To keep things simple, we’ll send a single character; “X”. ASCII for X is 88. As we are the sender, we only know the public key’s 2 values: 187 and 7, or N and e. Running 88 through the simple algorithm gives us the value 11. We send the ciphertext value 11 to the ecommerce web server.

The Web server has access to the private key, so it can decrypt the ciphertext.

The web server passes the plaintext through the algorithm shown above and gets us the original “X” that was sent. The bit that says:

Plaintext = 11^{23}(mod 187)

OK – there’s actually a problem here. In this message, every “X” would come out in ciphertext as the value 11. We could perform a frequency analysis attack on the message. In the English language, certain letters tend to appear more frequently than others. The letters “e” and “i” for example are very common, but “x” and “z” are uncommon.

There is a “signature” that could be used to find the content of a message. We therefore need to encrypt much larger blocks of data than just one byte at a time.

### Digital Signatures

Asymmetric keys, as mentioned earlier can be swopped around. If you use one key for encryption, you must use the other key for decryption. This feature comes in very handy for the creation of digital signatures. You’ve heard of digitally signed documents, authenticode, digitally signed applications, digital certificates and so on.

In the diagram you can see all we’ve done is combined some plaintext in to the same “message” as its equivalent ciphertext. When it’s time to check a digital signature, we reverse the process:

To check a message, we decrypt the encrypted portion, and get back plain text. We then compare that to the plain text in the message. If the 2 sets of plain text are different, it means either:

- The plaintext in the message has been altered and that accounts for the difference.
- The ciphertext in the message has been altered and that accounts for the difference.
- They have both been altered and that accounts for the difference.

In order to have a consistent message, the attacker would need to have access to the key that was used to generate the ciphertext.

Do you remember earlier, I talked about hashes? Well, because a message might be quite large, it’s often best to generate a hash of the message and encrypt that. If it’s an MD5 hash, it means you’ll only have to encrypt 128 bytes. When you come to perform the validation of the signature, you have to take the plain text portion and generate a hash before you do the comparison. It just uses the CPU more efficiently.

In this case, the message consists of a small section of ciphertext because the string-size of the input plaintext was reduced through hashing before it was encrypted. It also includes the plaintext of the message.

Depending on the data you are looking at, you’ll often even find the keys you can use to decrypt the message in plaintext within the message body. It seems like complete madness because anybody who intercepts the message could simply modify the plaintext portion of the message and then use the included key to generate a new ciphertext equivalent. That would make the message consistent.

However, if the plaintext key included in the message is the message-issuer’s public key, then the attacker would need access to the corresponding private key, which they won’t get because it’s, well, private.

But even with this there is still a problem. How do you know the message came from the sender it purports to come from? As an attacker, I could easily generate my own key-pair. I could then create a message that says I am the issuer and use my private key to create the encrypted part of the message.

When you come to check the message you’ll know that it definitely wasn’t tampered with in transit, but how do you know you can trust the public key embedded in to the message? How do you know that it’s me that created the message. That’s where digital certificates come in to play.

### Certificates

Certificates are data structures that conform to a specification: X.509. But really they are just documents that do what we just talked about. The plain text data is the public key, plus other distinguishing information like the issuer, the subject name, common name and so on. It is then hashed and the hash is encrypted using the private key of a special service called a certification authority (CA) – a service that issues certificates.

When we protect a web server with an SSL certificate, we go through a 2 stage process. generating a certificate request, and then finishing it off by receiving and installing the certificate. The request part, generates a public and private key. The public key plus the distinguishing information is sent to the CA, which then creates a digitally signed document, signed using the CA’s private key. The document conforms to X.509 certificate standards. The certificate is returned by the CA, and we install it on our web server.

Anytime anybody connects to the web server over SSL, they retrieve the certificate and perform a signature validation on it. Remember it was signed by the CA’s private key. So they have to have the CA’s public key to perform the validation. If you go in to Internet Explorer’s Internet Options and then to the Content tab, you’ll se a Certificates button. That shows you all the CAs you have certificates (and therefore public keys) for. It means if you see a certificate that was signed by a CA on a web site, in theory, the CA did a check to make sure the requester was indeed the requester before issuing the certificate. It means that you have to trust that the CA did a good job of checking the requester’s validity before issuing the certificate.

Even this creates a minor problemette – how do you know the CA’s certificate wasn’t created by an imposter of some description? Well, it can have its certificate signed by a CA higher up the food-chain than itself. Eventually you get to a CA at the top of the food chain and this is called a Root CA. Internet Explorer and all the other browsers have all the main Root CAs for the Internet built-in. These are trusted organisations. They have to be! They are so trusted, they are able to sign their own certificates.

You may from time to time play with a Visual Studio command line tool called makecert.exe. It’s a tool that creates self-signed certificates. If you are just using them for development purposes on a local machine they are probably fine. You trust yourself, presumably. Sometimes you can use self-signed certificates on Internet-facing services. For example if you upload your own self-signed certificate to a service and you are sure nobody intercepted it while you were uploading it (because you were using SSL maybe), it means you can have private conversations with the service and you can be sure the service is the service you issued the certificate to. If you just sent the naked certificate, they’d be able to encrypt messages that only you could decrypt, because you’d have the private key. It’s possible to also include the private key when you create a certificate. If you send one of these certificates to an Internet service, they can digitally sign messages they send to you with your private key. Because you are assured that you gave the private key only to the service, you can be sure the messages are genuinely coming from that service and not an imposter. You have to trust that the service do a good job of keeping your private key safe.

Of course it wouldn’t be practical if every time you wanted to buy something on the Internet, in order to create an SSL connection you had to first upload a self-signed certificate. That’s why there is a large infrastructure of CAs and Root CAs built on the Internet. This infrastrucutre is called a Public Key Infrastructure or PKI. Many organisations have their own internal PKIs.

Above: Internet Explorer’s list of Trusted Root CAs.

You can also see the chain of CAs up to that chain’s corresponding Root CA when you look at a certificate.

This shows an expired certificate that was issued to my BPOS (Office 365) account by the CA called “Microsoft Online Svcs BPOS EMEA CA1”. Its certificate was in turn issued by “Microsoft Services PCA” which had its certificate issued by “Microsoft Root Certificate Authority”. As it’s a Root CA, it appears in the Trusted Root CAs container in Internet Explorer. As you walk up the chain you have to eventually get to a point where you trust the certificate. If you don’t, you’ll get a certificate error warning and a lot of messages advising you not to continue.

I’ll write another post soon that goes through a complete SSL handshake. That's a great way to explain what’s happening in crypto.

Planky

thanx planky…….i am only a beginner in the field of information security. this article helped me to understand easily the concepts behind cryptography…

Great! Thanks.

I did a quick search for a crypto primer and only unearthed things primarily aimed at the advanced mathematician so thought an article that skimmed the maths but gave an overview of the principles involved was needed. Plus – my mathematics isn't strong enough to go any deeper than this article!

Planky

I am pretty sure Euclid's algorithm is not used to calculate

Plaintext = 11^23(mod 187)

There is nothing special about that calculation. On the other hand, calculating the private key d=23 in

7 * d = 1 (mod 160)

does require Euclid's algorithm (when larger numbers are involved). Actually, it requires an extended version because Euclid's algorithm only calculates the greatest common divisor of two numbers.

See en.wikipedia.org/…/Extended_Euclidean_algorithm

Thanks Keith. I'll update the post to show how improbable it is to calculate the private key, which is the actual problem space.

I was always in danger of having somebody who knows what they are talking about picking me up on the mathematics (or the "math" as they say in the US. Often wondered why the "mathematics" is plural but the shortened version is singular)..

I might even edit the post to include elements of the article you reference and make it seem as though I actually know all about the "math". But I'm sure I'll be rumbled.

Thanks for sticking with it actually Keith, I know when I come across stuff I already know, I just skim-read it… Or perhaps this mistake was so obvious on the page it was shouting "I AM WRONG!"…. ðŸ™‚

I should have added that the primer is a good introduction. I am currently taking a computer security course and this is explained in terms very similar to how my professor did it.

I wonder if that means I could become a professor? Professor Planky has quite a nice ring to it doesn't it?

Thanks Keith.

Excellent article Planky. I definitely fall under the 'skim-read' category due to previous knowledge and as such I didn't check your mathematics thoroughly but your front to back explanation is excellent and concise. I think this may be one of the best that I have seen. Definitely a great primer for anyone looking to understand basic encryption techniques and as it applied to secured web traffice. Well done!

Keep up the good work ðŸ™‚

Well – that's good to know! Looks like a professorship is in the bag! Just probably not for mathematics…

Thanks Tom.

Planky

You should listen to the first 100 or so episodes of "Security Now", a podcast with Steve Gibson and Leo Laporte. It complements and extends this material.

I just had a look at the site and downloaded a bunch of general interest stuff I'll listen to on my WP7 when I'm travelling/in the gym/driving….

Quite a range of material, incluing stuff I've always been interested in but never took the time to investigate…

Thanks fo rthe pointer…

Planky

Thanks a lot , Very good explanation !!!!

casa dia 1109n9fone1106n6dirce6= antonio almeida1106n6 orlanda dias soares1061107n7f40232306dirce6=banco santanderdia 1109n9ate dirce9fone1109n9

that last comment some kind of crypto?

Excellent explain. Last line is crypto ðŸ™‚ ?

just i started to learn cryptography today. its an gud introduction on cryptography with the whole picture in mind.

uoy knaht,

planky..

Hi Ramesh,

"dirce silviapinto dovalke1109n9aten dirce9" (now that's what I call a name!) wrote, as the last line of his comment "soares1061107n7f40232306dirce6=banco santanderdia 1109n9ate dirce9fone1109n9". Surely that's some cryptotext?

Hi Senthil Murugan,

"uoy knaht" to you too – I'm glad you found it useful…

thanks.. it z a nice article

A delayed (almost 12 months!) thanks to you Azra.

Very useful article for a product manager trying to extend a product to the web–thanks!

how images can be encrypted using rsa algorithm. I have generated the public and private keys. I know how to encrypt and decrypt the images using rsa. without key I am able to encrypt the image by generating the key from image suze mxn(pixel size). not getting how public key (n,e) used to encrypt and private key (c,d) to decrypt the image.

Hi SRK,

Are you saying "suze mxn(pixel size)" is an API that generates the key for you but you don't understand how it does it? Can you provide more information? I can't understand what question you are asking based on what you've provided. Thanks.

How do Alice and Bob know that they need to use [7^(number) mod 11] in their calculations for step 1.

Will the interceptor has access to this formula? If the intercept has alpha and beta wont he be able to find out the key used?

Hi Olu,

They both know the algorithm (as does anybody who knows Diffie Helman Merkle) so they both do the same things.

This illustrates exactly the point that it's the keys you keep secret, not the formula (algorithm). You could broadcast this formula on the radio, TV and Internet every 15 minutes for 300 years. As long as you keep the keys secret (and they keys are considerably longer than I have illustrated in this example!), confidentiality is maintained.

Go back and have a quick read of the opening part of the article – where I talk about keys and algorithms. THis algorithm exploits one way functions. Functions where even when you know the formula (algorithm), it's still very difficult to get back to the original number.

Try it yourself – have a look at the formula and see if you can calculate the secrets from it?

Lovely writeup. Very neat and written in simple language. Thank you.

Thanks Vinayaga – always nice to know these things help people in some way or other.

Thanks Planky,

Great article. Helped me out bunches.

Thanks for sharing your views. Great blog here…We provides digital signature like <a href=" http://www.digitalsignaturecertificates.info/"> digital signature certificate</a>

Thanks you for the good write-up. We provides <a href=" http://www.esolutions.net.in"> digital signature certificate</a>.

Thanks for the great article which provides useful information as well as clear explanation.

May I ask you a question !!! How can you calculate the digest function (hash values) in digital signature ??

I mean, how the digest function is used during encrypting the digital signature and how the receiver compares between the hash values (after split message and digital signature) to ensure the integrity of the message ?

I will be more than thankful (again) if you clarify it for me

Regards

Let's say you had a 1GB message that you wanted to apply a digital signature to…

To encrypt 1GB is computationally expensive. It is computationally expensive to decrypt it too.

A digital signature consists of 2 parts. The plain text. And an encrypted version of the plain text.

When you come to validate the signature, you'd have to do the computationally expensive operation of decrypting the encrypted portion before you could compare it to the plain text portion.

To reduce the compute burden, instead of encrypting the entire 1GB of the message, we do something more efficient. We run the message through a hashing algorithm and get a much smaller string. We then encrypt that string which means we encrypted just a few bytes rather than 1GB. So computationally that is not at all expensive.

When it comes time for you to validate the signature you have to reverse those steps. So you decrypt the encrypted portion of the message. The decrypted text is equal to the hash you encrypted in the first place.

You then take the plain text portion of the message and run it through a hashing algorithm. You now have 2 hashes. You compare them – they should be exactly the same. If they're not, then something has happened to the integrity of the message between the time the signature was created and the time you validated it.

Hope that makes sense…

You can often see a novice looking through an XML signature and they say "hey look – you can see the message here. It's all in plain text. We could easily change that". But of course if they do, then when you generate the hash it will be a different value to the one stored in the signature.

So the novice's next task is to change the encrypted hash in the message. But to do that he needs access to the private key that was used to create it in the first place. Well, that's not available because, well, it's private… He can use the public key to decrypt it. But the public key doesn't allow him to *encrypt* the message. So he's stuck…

Hi Planky,

Thanks again and it is clear for me right now as I really understand how it works with this sufficient example (1 GB message).

If you don't mind Sir, I have one more question about the hashing algorithm.

I know that we use digest function, such as SHA-1 and MD5, in order to calculate the hash algorithm of the message before sending it and after receiving it. So can you kindly please give me another example of how to calculate it ???

By the way, the example you provide about public/private keys is brilliant and make it so easy to be understood.

Thanks a lot for this great information ðŸ™‚

Regards

Hi Fahad,

I'm glad the explanation worked..

DO you mean you'd like an example of how the mathematics inside MD5 or SHA-1 or …… works? Or you'd just like a code example of how to generate a hash?

The latter is easy – the MSDN docs have an example. The former is more difficult because we'd need to delve in to the guts of the algorithms.

MSDN example here:

—- cut here —–

using System;

using System.Security.Cryptography;

using System.Text;

namespace MD5Sample

{

class Program

{

static void Main(string[] args)

{

string source = "Hello World!";

using (MD5 md5Hash = MD5.Create())

{

string hash = GetMd5Hash(md5Hash, source);

Console.WriteLine("The MD5 hash of " + source + " is: " + hash + ".");

Console.WriteLine("Verifying the hash…");

if (VerifyMd5Hash(md5Hash, source, hash))

{

Console.WriteLine("The hashes are the same.");

}

else

{

Console.WriteLine("The hashes are not same.");

}

}

}

static string GetMd5Hash(MD5 md5Hash, string input)

{

// Convert the input string to a byte array and compute the hash.

byte[] data = md5Hash.ComputeHash(Encoding.UTF8.GetBytes(input));

// Create a new Stringbuilder to collect the bytes

// and create a string.

StringBuilder sBuilder = new StringBuilder();

// Loop through each byte of the hashed data

// and format each one as a hexadecimal string.

for (int i = 0; i < data.Length; i++)

{

sBuilder.Append(data[i].ToString("x2"));

}

// Return the hexadecimal string.

return sBuilder.ToString();

}

// Verify a hash against a string.

static bool VerifyMd5Hash(MD5 md5Hash, string input, string hash)

{

// Hash the input.

string hashOfInput = GetMd5Hash(md5Hash, input);

// Create a StringComparer an compare the hashes.

StringComparer comparer = StringComparer.OrdinalIgnoreCase;

if (0 == comparer.Compare(hashOfInput, hash))

{

return true;

}

else

{

return false;

}

}

}

}

// This code example produces the following output:

//

// The MD5 hash of Hello World! is: ed076287532e86365e841e92bfc50d8c.

// Verifying the hash…

// The hashes are the same.

—-cut here ——

The complete doc reference is:

msdn.microsoft.com/…/system.security.cryptography.md5(v=vs.110).aspx

Here is a good YouTube video which goes to explain the mathematics to a degree.

http://www.youtube.com/watch

Hope these links can help you.

Planky

You are a really good person….. I don't know how much I can thank you for the excellent explanation.

I will read the code and browse the links to understand how mathematics can be done inside MD5. at least I know the process of the digest function.

The code above will be helpful for me to understand the mathematics of MD5 as well as will be helpful for anyone who wants to build the program itself.

Regards

Really interesting and easy to understand article.

Thanks

Many thanks! You did a fantastic job of explaining a fairly difficult topic in layman terms.

Great article. Helps to explain it very clearly.

"Follow the steps 1 through 4. In the last step both Alice and Bob have the same key: 9. From this point on they can use 9 as their encryption and decryption key. All I can tell you is that it works. Why it works I have no idea â€“ I am very poorly educated! However, Iâ€™m happy to live with the fact that it just works. If itâ€™s beyond you, youâ€™re not alone. Maybe you are also poorly educated! I do think itâ€™s really clever, neat and cool though."

The reason this works is because….

(7^A)^B = (7^B)^A = 7^(A*B)

ðŸ™‚

http://www.zeugnis-portal.de

Nice post thanks for good tips.

my usb token a missing a private key not a usb token are respond a login

Ha ha CJ. Yes, that's true. Definitely can't argue with that.

Hi Jyoti,

Could you tidy up the language in your post – I can't quite get what you are saying/asking?

I haven't finished reading the article yet but I feel that I need to say thanks. Thank you for this valuable article.

Planky, I really enjoyed your article.

In reference to your 29 Oct 2010 2:58 PM remark, "(or the "math" as they say in the US. Often wondered why the "mathematics" is plural but the shortened version is singular)", "mathematics" is singular in the U.S., just like "math." For example, I'd write "Mathematics bothers some people, but other love it." (I wrote "bothers", not "bother.") I'd also write "Math comes easily to my little brother, but it confuses me." (Us U.S. folks write "comes", not "come", and "confuses", not "confuse.")

Hi Planky, very good article.

Just one thing. e must be chosen in such a way that e and (p-1)*(q-1) are coprime. I almost went crazy trying to figure out why my example was not working with p=5 q=7 and e=3. ref: en.wikibooks.org/…/A_Basic_Public_Key_Example

Thanks again.